You need to use a bootable floppy. Insure FDISK is on this thing. You will need to make a partition manually. Next, you will need to make sure you have no more than 512MB of RAM Next, depending on if you have 95B or 95C. You will have to make several small partitions, or up to 32 gigs of space for FAT32. If your drive is larger than 32Gigs, only 32 will be usable, even if you partition it. After using fdisk, booting the floppy, it will probably make a CD drive called R: type R: Setup This should launch the setup for Windows 95. Follow the prompts. You may need to set your BIOS to a compatibility mode, which usually slows timing and removes hardware BIOS shadowing. You can re-enable optimum mode after you are done installing. If you are using Win95B, you may not support FAT32, only FAT16, and therefore will need convert it to FAT32 after it is installed (there will be a tool in your start menu to do this) Good luck finding drivers for your hardware. I have at least one 95 boot disk that includes OAKCDROM (under the name NEC), the customized/OEM-made ones are honestly not necessary unless you're using their hardware. And really, I just like having official stuff. Anybody can make a floppy image in WinImage, but there's a collector's market for non-modified stuff. I make blank *.img floppy 2. Capture it in VM. In Windows 95, I open Control Panel/Add or Remove Programs/Startup Disk 4. And I make boot disk. I maked in this year floppies because I lost same floppies when my laptop was crashed in February 2013 and I lost boot disks and my Windows collection. El sida es curable isaac goiz pdf download. No, you would boot from floppy disk (either built-in, if your laptop has a built-in floppy drive, or from a USB floppy drive). Then you would use fdisk on the floppy to create the partitions you want, format the hard drive, create C: Windows options cabs, copy the contents of the CD's cabs folder to that location, then run setup.exe from C: windows options cabs. Also, you might want to put the Windows CD in another computer and make sure you can read it. It's always possible the CD has suffered bit rot over the years. If it's unreadable, email me (lordpeyre at yahoo.com) and I'll see what I can do to help. Follow that advice as he (she?) is exactly right. Yes, Win 98 was the first to boot directly, AS A general rule. But I know of SOME Win 95 OEM disks that were bootable, (Usually into a repair type option), and at least one LATE Win 95 disk version that would, but it was after the OSR2. With USB support, & FAT 32 support. Some early Win 95 versions only supported Fat 16. And trust us, you do not want that one! ('Normal' Floppies are Fat 12, BTW) A far better option would be at LEAST Win 98se, at a minimum. Almost nothing works with it now. Or even better, a Linux distro intended for older hardware.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |